LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> Test NS-SEL: No Start Test Selection

Test NS-SEL: No Start Test Selection

NOTE: If Powertrain Control Module (PCM) has been replaced and current Vehicle Identification Number (VIN) and mileage have not been entered, a Diagnostic Trouble Code (DTC) will be set in Anti-Lock Brake System (ABS), Smart Key Immobilizer (SKIM) and air bag modules. If vehicle is equipped with a Smart Key Immobilizer (SKIM), secret key data must be updated to enable engine starting. See PROGRAMMING .

No Start (NS) tests may be performed if a no response or no start problem exists. Perform appropriate NS test in accordance with the problem to be checked. See NO START TEST MENU  table.

NO START TEST MENU

Application Test
Engine Cranks But Does Not Start NS-1 
No Crank Condition NS-2 
No Response From PCM With A No Start Condition NS-3 
Start & Stall Condition NS-4