Installation (Cirrus, Sebring Convertible & Stratus - 2.5L)
- If reusing crankshaft position sensor, clean old paper spacer from flywheel end of crankshaft position sensor. Install NEW paper spacer on flywheel end of crankshaft position sensor.
- On all crankshaft position sensors, install crankshaft position sensor in transaxle housing. Push crankshaft position sensor downward until it contacts the flywheel.
- Install and tighten bolt for crankshaft position sensor to specification while holding crankshaft position sensor against flywheel. See TORQUE SPECIFICATIONS . Reinstall electrical connector and speed control servo.