LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine >> Removal & Installation >> Thermostat >> Installation

Removal & Installation: Thermostat: Installation

NOTE: Install thermostat with the bleed valve located at the 12 o'clock position.
  1. Clean gasket sealing surfaces.
  2. Install thermostat and gasket into the thermostat housing.
  3. Install thermostat and housing to cylinder block. See TORQUE SPECIFICATIONS .
  4. Connect heater and lower radiator hoses. Install hose clamps.
  5. Install generator and attaching bolts.
  6. Lower vehicle.
  7. Install accessory drive belt.
  8. Refill cooling system.
  9. Connect negative cable to remote jumper terminal.
scientia non olet · About LEMON Manuals