LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine >> Removal & Installation >> Radiator >> Installation

Removal & Installation: Radiator: Installation

  1. Slide radiator down into position. Seat the radiator assembly lower rubber isolators in the mounting holes provided in lower radiator support.
  2. Attach A/C condenser to mounting clips on radiator. Install mounting screws. See TORQUE SPECIFICATIONS .
  3. Connect lower radiator hose and clamp.
  4. Install transmission cooler line bracket and attaching fastener. Connect automatic transmission hoses.
  5. Install fan module.
  6. Connect fan motor electrical connector.
  7. Connect engine oil cooler lines (if equipped).
  8. Install upper radiator hose. Align hose so it does not interfere with the accessory drive belt or engine. Position hose clamp so it will not interfere with the hood liner.
  9. Install upper radiator support crossmember.
  10. Connect negative cable to remote jumper terminal.
  11. Refill cooling system.
  12. Operate engine until it reaches normal operating temperature. Check cooling system and automatic transmission for correct fluid levels.
scientia non olet · About LEMON Manuals