LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.7L V6 Engine >> Overhaul >> Cylinder Block Assembly >> Fitting Pistons

Fitting Pistons

NOTE: Piston diameter should be measured at normal room temperature of 70°F (21°C).

To determine if piston-to-cylinder clearance is within specification, piston skirt diameter should be measured 39" (10 mm) from bottom of piston at 90-degree angle to piston pin. Piston diameter must be within specification. See PISTONS, PINS & RINGS  table under ENGINE SPECIFICATIONS. Cylinder bore measurements should be taken at approximately middle of bore and transverse to engine crankshaft center line.

scientia non olet · About LEMON Manuals