LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - TEVES Mark 20 >> Removal & Installation >> Controller Anti-Lock Brake >> Removal

Controller Anti-Lock Brake: Removal

  1. CAB is located in engine compartment, along with HCU. See Figure . Remove ICU from vehicle. See INTEGRATED CONTROL UNIT  . Disconnect pump/motor electrical connector from CAB.
  2. Remove 4 CAB-to-HCU bolts. Remove CAB from HCU by pulling straight up from connector on HCU. DO NOT twist CAB during removal from HCU.
scientia non olet · About LEMON Manuals