LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Fuel Systems >> Fuel System Pressure Release >> All Others

All Others

Remove fuel pump relay from relay Power Distribution Center (PDC). See AUTO SHUTDOWN (ASD) RELAY & FUEL PUMP RELAY  under MOTORS, RELAYS & SOLENOIDS. Start and run engine until it stalls. Attempt to start engine until it no longer runs. Turn ignition off.

Fig 1: Accessing Fuel Level Sending Unit & Fuel Pump
G00007329Courtesy of DAIMLERCHRYSLER CORP.