Wiper/Washer Switch
Wiper/washer switch is part of multifunction switch. Disconnect multifunction switch connector. See WIPER SWITCH under REMOVAL & INSTALLATION. Measure resistance between switch terminals with switch in appropriate position. See WIPER/WASHER SWITCH RESISTANCE table. See Fig 1 . If resistance is not as specified, replace wiper/washer switch.
WIPER/WASHER SWITCH RESISTANCE
| Switch Position | Between Terminals No. | K/Ohms | |||
|---|---|---|---|---|---|
| OFF | 1 & 3 | 300 Or More | |||
| Delay Level | |||||
| 1 | 1 & 3 | 9.72 | |||
| 2 | 1 & 3 | 8.22 | |||
| 3 | 1 & 3 | 6.61 | |||
| 4 | 1 & 3 | 5.12 | |||
| 5 | 1 & 3 | 3.67 | |||
| 6 | 1 & 3 | 2.22 | |||
| LOW | 1 & 3 | 1.02 | |||
| HIGH | 1 & 3 | 0.51 | |||
| WASH | 1 & 2 | (1) | |||
|
|||||