LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Cirrus LXi, 2.0 C >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (Service Information) >> Removal & Installation >> Input Speed Sensor >> Removal & Installation

Removal & Installation

  1. Disconnect electrical connector from input speed sensor located on side of transaxle case. Ensure weather seal remains on electrical connector. Remove input speed sensor from transaxle case.
  2. To install, reverse removal procedure. Tighten input speed sensor to specification. See TORQUE SPECIFICATIONS  . Reconnect electrical connector.
scientia non olet · About LEMON Manuals