LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1998 >> Sebring Limited >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer (Except Coupe) >> Body Control Computer Tests >> VTSS Test 1B - Disarming VTSS

VTSS Test 1B - Disarming VTSS

NOTE: Perform VTSS TEST 1A  before proceeding with this test. For connector terminal identification, refer to CONNECTOR IDENTIFICATION  . For wiring diagrams, refer to WIRING DIAGRAMS  . Perform, after each repair, TEST VER-1A - VERIFICATION PROCEDURE  .
CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.

Turn ignition off. Put key in left front door and turn to UNLOCK position. Using key, turn ignition on. Using scan tool, read VTSS status. If scan tool displays CURRENT MODE DISARMED, system is functioning properly. Return to VTSS TEST 1A  . If scan tool does not display CURRENT MODE DISARMED, perform VTSS TEST 11A  .

scientia non olet · About LEMON Manuals