Engine Controls - Specifications - 2.4L: Capacities

BATTERY SPECIFICATIONS

Application & Group	Cold Cranking Amps	Amp Hr. Rating
Sebring Convertible
(Group 75)	510	60

FLUID CAPACITIES

Application

⁽¹⁾ Quantity

Crankcase (Includes Filter) ⁽²⁾

5.0 Qts. (4.7L)

Cooling System ⁽³⁾

9.0 Qts. (8.5L)

Automatic Transaxle (Mopar ATF Plus Type 7176)

Drain & Refill

⁽⁴⁾ 4.0 Qts. (3.8L)

Dry Refill

9.1 Qts. (8.6L)

Power Steering Fluid ⁽⁵⁾

⁽⁶⁾

⁽¹⁾	Approximate quantity listed.

⁽²⁾	Use an API engine oil that is certified for gasoline engines on all engines.

⁽³⁾	Quantity includes heater and coolant recovery tank.

⁽⁴⁾

Add this amount of fluid. Start engine and shift transaxle through all gears and back to Park. Add additional fluid to bring fluid level to 1/8" below the ADD mark on dipstick. Recheck fluid level with transaxle at normal operating temperature. Adjust fluid level so fluid level is within the HOT range on dipstick.

⁽⁵⁾	Use only Mopar power steering fluid. DO NOT use automatic transmission fluid.

⁽⁶⁾	Capacity is not available from manufacturer.