Strut Assembly: Removal
- Raise and support vehicle. Remove wheels. Disconnect stabilizer bar link from strut assembly. Loosen, but DO NOT remove, outer tie rod end-to-strut mounting nut. Remove outer tie rod end from strut using Puller (MB-990635).
- Remove ABS speed sensor cable routing bracket from strut assembly (if equipped). Remove brake caliper and wire aside. DO NOT allow caliper to hang by brake hose. Remove brake rotor.
- Remove strut-to-steering knuckle nuts. Remove strut-to-steering knuckle bolts. Remove 3 upper strut mounting nuts and washer. Remove strut from vehicle. Check strut for fluid leakage.
CAUTION:
DO NOT turn strut-to-steering knuckle bolts. Bolts are serrated and will damage steering knuckle if rotated. Remove nuts from strut-to-steering knuckle bolts.