LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> Suspension >> Front Suspension >> Removal & Installation >> Coil Spring >> Removal

Coil Spring: Removal

  1. Raise and support vehicle. Remove wheel and strut assembly. See STRUT ASSEMBLY . Position strut assembly in vise by clamping steering arm. Using paint, index strut unit, lower spring isolator, spring and upper strut mount.
  2. Position Spring Compressor (C-4838) on spring. Ensure 5 coils of spring are between both jaws of compressor. Compress spring until all load is removed from upper strut mount assembly. See Figure.
  3. Install Strut Rod Socket (L-4558A). Place a 10-mm socket onto end of strut shaft to keep shaft from turning. See Figure. Loosen and remove strut shaft nut. Remove upper strut mount, seat and dust shield. Pull spring from strut assembly. See Figure. Loosen spring compressor and remove from spring.
scientia non olet · About LEMON Manuals