LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Charging System - Generators & Regulators) >> Self-Diagnostic System >> Retrieving DTCS >> Using Scan Tool

Using Scan Tool

WARNING: This page is about a different car, the 1996 Eagle Vision, 1996 Dodge Intrepid, 1996 Chrysler New Yorker, 1996 Chrysler LHS, and 1996 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure battery is fully charged. Connect scan tool to Data Link Connector (DLC). DLC is located below instrument panel, near steering column.
  2. Using scan tool manufacturer's instructions, retrieve and record DTCs displayed on scan tool and proceed to SELF-DIAGNOSTIC TESTS. Once repairs are made, ensure DTCs are cleared from PCM memory. See CLEARING DTCs.
scientia non olet · About LEMON Manuals