LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> LHS >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Adjustments >> BRAKELIGHT Switch

BRAKELIGHT Switch

  1. Brakelight switch is located in mounting bracket, near top of brake pedal. Rotate brakelight switch 30 degrees counterclockwise and remove switch from mounting bracket. Disconnect electrical connector from brakelight switch.
  2. Pull plunger on brakelight switch outward until plunger has ratcheted outward to fully extended position. Fully depress brake pedal. Install brakelight switch in mounting bracket so index tab on brakelight switch aligns with slot in mounting bracket.
  3. With brakelight switch fully seated in mounting bracket, rotate brakelight switch 30 degrees to lock brakelight switch in mounting bracket. Reinstall electrical connector on brakelight switch.
    CAUTION: DO NOT use excessive force when pulling brake pedal upward or brakelight switch may be damaged.
  4. Gently pull brake pedal upward toward brakelight switch until brake pedal stops moving. This will ratchet plunger on brakelight switch backward to correct operating position.
scientia non olet · About LEMON Manuals