LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> Concorde LXi >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (A/C-Heater System - Manual) >> Trouble Shooting >> Functional Test >> Entering Functional Test

Entering Functional Test

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

To enter calibration, start engine and set parking brake. Turn blower switch on. Set temperature selector to full cold position and mode door selector to defrost position. A/C and rear defogger switches can be in ON or OFF position. Depress and hold rear defogger switch. After 3-5 seconds, rear defogger LED will flash. Release button when LED begins to flash. System is now in functional test mode. If LED does not go out after approximately 30 seconds, go to FUNCTIONAL TEST step 1). If LED goes out after approximately 30 seconds, calibration is successful. Go to FUNCTIONAL TEST step 4).

scientia non olet · About LEMON Manuals