LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> Concorde LXi >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (A/C-Heater System - Manual) >> Testing >> Verification Test

Verification Test

WARNING: This page is about a different car, the 1995 Eagle Vision, 1995 Dodge Intrepid, 1995 Chrysler New Yorker, 1995 Chrysler LHS, and 1995 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reconnect all previously disconnected components and wiring. If battery or BCM has been disconnected, door actuators must be calibrated. Start engine and use DRB to calibrate door actuators. DO NOT allow vehicle to move during calibration. Ensure ignition is on and use DRB to erase fault codes.
  2. Turn ignition off, wait at least 5 seconds and then turn ignition on (engine off). Operate system to verify correct operation. If system is still malfunctioning, go to IDENTIFYING VEHICLE EQUIPMENT & SYSTEM PROBLEMS. If A/C system operates properly, recheck for other trouble codes. If no trouble codes are present, testing is complete.
scientia non olet · About LEMON Manuals