LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1997 >> Cirrus LX, 2.5 H >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer (Except Coupe) >> Body Control Computer Tests >> Power Door Lock Test 5A - Doors Fail To Lock From Any Switch

Power Door Lock Test 5A - Doors Fail To Lock From Any Switch

NOTE: Perform POWER DOOR LOCK TEST 1A  before proceeding with this test. For connector terminal ID, see CONNECTOR IDENTIFICATION  and WIRING DIAGRAMS  . Perform TEST VER-1A - VERIFICATION PROCEDURE  after each repair.
CAUTION: Always turn ignition switch to OFF position prior to disconnecting or connecting any module connector.
  1. Using scan tool, actuate door locks. If door locks operate, go to next step. If door locks do not operate, replace BCM.
  2. Using scan tool, read left front door ajar status and close left front door. If scan tool displays, LF DOOR: OPEN, replace BCM. If scan tool does not display, LF DOOR: OPEN, go to DOOR AJAR TEST 2A  .
scientia non olet · About LEMON Manuals