LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1996 >> New Yorker >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Computer >> Self-Diagnostic System >> Test 86A - Testing OTIS Switches

Test 86A - Testing OTIS Switches

NOTE: For connector terminal identification and wiring diagrams, see BODY CONTROL COMPUTER  section in this article. Perform TEST VER-1  VERIFICATION TEST after each repair.
CAUTION: Always turn ignition off prior to disconnecting any module connector.
  1. Turn ignition off. Leave key in ignition switch. Open left front door. If chime does not sound, go to TEST 1. If chime sounds, go to next step.
  2. Turn ignition on. Close left front door. Press each OTIS button and listen for beep. If beep is not heard, replace OTIS module. If beep is heard, switches are working properly at this time.
scientia non olet · About LEMON Manuals