LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1996 >> LHS >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Power Windows) >> System Tests >> Power Supply

Power Supply

WARNING: This page is about a different car, the 1998 Dodge Intrepid and 1998 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.

Remove driver door trim panel. See DOOR TRIM PANEL  under REMOVAL & INSTALLATION. Disconnect window switch harness connector. Check voltage between harness connector pin No. 1 (positive) and pin No. 2 (negative). If battery voltage exists, check switch. See WINDOW SWITCH TEST  . If battery voltage does not exist, check circuit breaker No. 1 in junction block. If circuit breaker is okay, repair open circuit.

scientia non olet · About LEMON Manuals