LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1996 >> LHS >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes >> Using Scan Tool

Using Scan Tool

  1. Ensure battery is fully charged. Attempt to start engine. Turn ignition off. Connect scan tool to Data Link Connector (DLC), located below driver's side of instrument panel.
  2. Turn ignition on. Using scan tool manufacturer's instructions, record all DTCs displayed on scan tool. Using all DTCs obtained, proceed to TESTS W/CODES . Once all repairs are made, ensure DTCs are cleared from PCM. Refer to CLEARING DIAGNOSTIC TROUBLE CODES .
scientia non olet · About LEMON Manuals