LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1996 >> Cirrus LXi, 2.5 H >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Self-Diagnostic Tests >> Test 20A: Controller Enable

Test 20A: Controller Enable

NOTE: For connector terminal ID, see CONNECTOR IDENTIFICATION  . For wiring diagram, see WIRING DIAGRAM  .
  1. Turn ignition off. Remove and replace Controller Anti-Lock Brake (CAB). Reconnect all connectors. Turn ignition on. If ABS warning light is not flashing, repair is complete. Perform TEST VER-1A  . If ABS warning light is flashing, go to next step.
  2. Using scan tool, exit and re-enter ABS diagnostics. Scan tool will automatically enable new CAB. If CAB is enabled, repair is complete. Perform TEST VER-1A  . If CAB is not enabled, go to next step.
  3. Ensure correct CAB is installed in vehicle. Using scan tool, exit and re-enter diagnostics. Repair is complete. Perform TEST VER-1A  .
scientia non olet · About LEMON Manuals