LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Town & Country AWD >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Testing >> Window Switch Voltage Test

Window Switch Voltage Test

NOTE: The following wiring test sequence determines whether or not voltage is continuous through body harness to switch.
  1. Remove window switch. See WINDOW SWITCH under REMOVAL & INSTALLATION. Carefully separate multiple terminal block on wiring harness from window switch body. Turn ignition switch to ON or ACCESSORY position.
  2. Using a test light, connect one lead to Black wire terminal. Touch other test light to Tan wire terminal wire.
  3. If test light comes on, wiring circuit between battery and switch is okay. If light does not come on, check 20-amp fuse in micro relay bank or check for a broken feed or ground wire. Repair and replace as necessary.
scientia non olet · About LEMON Manuals