Window Switch Continuity Test
Remove switch from mounting position. See WINDOW SWITCH under REMOVAL & INSTALLATION. Using an ohmmeter, check switch continuity. See MASTER WINDOW SWITCH POSITION CONTINUITY TEST table or PASSENGER WINDOW SWITCH POSITION CONTINUITY TEST table. If there is no continuity at any one of the switch positions, replace switch. See Fig 1 , or 3.
MASTER WINDOW SWITCH POSITION CONTINUITY TEST
| Switch Position | Continuity Between Pins No. | |
|---|---|---|
| Off | 1-2, 2-3, 2-4, 2-6 | |
| Up | ||
| Driver Side | 3-5, 2-6 | |
| Passenger Side | 1-5, 2-4 | |
| Down | ||
| Driver Side | 5-6, 2-3 | |
| Passenger Side | 1-2, 4-5 | |
PASSENGER WINDOW SWITCH POSITION CONTINUITY TEST
| Switch Position | Continuity Between Pins No. |
|---|---|
| OFF | 1-4, 2-5 |
| Up | 3-4, 2-5 |
| Down | 2-3, 1-4 |