Vent Window Switch Test
Vent window switches are located in overhead console. Remove overhead console. See VENT WINDOW SWITCHES under REMOVAL & INSTALLATION. Disconnect wire harness from console. Using an ohmmeter, test switches. See Fig 1 . If no continuity is present at any position, replace vent window switch(es). See VENT WINDOW SWITCH POSITION CONTINUITY TEST table.
VENT WINDOW SWITCH POSITION CONTINUITY TEST
| Switch Position | Continuity Between Pins No. |
|---|---|
| OFF | 2-4, 3-4, 4-6, 4-7 |
| A | 2-4, 3-5, 4-6, 5-7 |
| B | 2-5, 3-4, 4-7, 5-6 |