Cruise Control Switches
WARNING: This page is about a different car, the 1995 Chrysler New Yorker and 1995 Chrysler LHS. However, it is still accessible from the selected car via links, so may be relevant.
Access cruise control switches. Disconnect both cruise control switch 2-pin connectors. Using an ohmmeter, check both cruise control switches. If either cruise control switch does not test as specified, replace defective switch. See TESTING CRUISE CONTROL SWITCHES table. See CONNECTOR IDENTIFICATION.
TESTING CRUISE CONTROL SWITCHES
| Switch Position | Check Between Terminals No. | Ohms | |||||
|---|---|---|---|---|---|---|---|
| ON/CRUISE/OFF Switch | |||||||
| (1) | 1 & 2 | 22,351-22,848 | |||||
| OFF | 1 & 2 | 0-.5 | |||||
| ON | 1 & 2 | 644-668 | |||||
| SET/RESUME Switch | |||||||
| (1) | 1 & 2 | (2) | |||||
| RES/ACCEL | 1 & 2 | 5558-5682 | |||||
| SET/COAST | 1 & 2 | 1978-2022 | |||||
|
|||||||