LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> Sebring LXi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.5L V6 >> Test NS-3A >> Inspecting Engine Mechanical System

Inspecting Engine Mechanical System

NOTE: For circuit and connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagrams, see WIRING DIAGRAMS - 2.5L V6 article in ENGINE PERFORMANCE.
  1. Remove all spark plugs. Inspect spark plug tips for wet fuel. If spark plug tips are wet, clean and reinstall spark plugs. If spark plug tips are not wet, reinstall spark plugs. Inspect spark plug cables for correct placement. Reposition wires as required. Perform TEST VER-1.
  2. If spark plug cables are okay, check valve timing. Correct valve timing as required. Perform TEST VER-1. If valve timing is okay, check engine compression. Repair as required. Perform TEST VER-1. If engine compression is okay, no-start condition is NOT caused by an electrical problem. Repair engine mechanical failure. Perform TEST VER-1 .
scientia non olet · About LEMON Manuals