LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1995 >> LeBaron >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Test 8B >> Left Rear Wheel Speed Sensor Continuity Fault

Left Rear Wheel Speed Sensor Continuity Fault

NOTE: For connector terminal identification, see CONNECTOR IDENTIFICATION. For wiring diagram, see wiring diagram.
  1. Using an external ohmmeter, check resistance between CAB connector terminals No. 3 (Light Green/Dark Blue wire) and No. 4 (Light Green wire). If resistance is less than 5 ohms, repair Light Green/Dark Blue and Light Green wires for short to each other. Perform TEST VER-1A. If resistance is more than 5 ohms, go to next step.
  2. Disconnect left rear WSS. Connect a jumper wire between chassis ground and terminal No. 2 (Light Green wire) of left rear WSS. Using scan tool in ohmmeter mode, check resistance of CAB connector terminal No. 4 (Light Green wire). If resistance is less than 5 ohms, repair open in Light Green/Dark Blue wire. Perform TEST VER-1A. If resistance is more than 5 ohms, repair open in Light Green wire. Perform TEST VER-1A.
scientia non olet · About LEMON Manuals