LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1994 >> LHS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator & Regulator >> Self-Diagnostic System >> DRB Test Functions >> DRB Volt/Ohmmeter Mode

DRB Volt/Ohmmeter Mode

  1. To access DRB volt/ohmmeter mode, connect Red volt/ohmmeter test lead to Red port, located on right-top side of DRB.
  2. To place DRB in voltmeter mode, press VOLT/OHM key once. Touch test probe to connector or wire to be measured. Read voltage on DRB display. When voltage testing is complete, press VOLT/OHM key 3 times to exit voltmeter mode.
  3. To place DRB in ohmmeter mode, press VOLT/OHM key twice. Touch test probe to connector or wire to be measured. Read resistance to circuit ground on DRB display. When resistance testing is complete, press VOLT/OHM key twice to exit ohmmeter mode.
scientia non olet · About LEMON Manuals