Cruise Control Switch Test
Access cruise control switch. See Figure . Disconnect cruise control switch 4-pin connector. Using an ohmmeter, check cruise control switch. If cruise control switch does not test as specified, replace switch. See TESTING CRUISE CONTROL SWITCH .
TESTING CRUISE CONTROL SWITCH
| Switch Position | Check Between Pin Nos. | Ohms |
|---|---|---|
| OFF | 3 & 4 | 5890-6510 |
| OFF | 1 & 3 | Open |
| ON | 1 & 4 | 5890-6510 |
| ON | 1 & 3 | Continuity |
| ON/SET | 3 & 4 | 1020-1130 |
| ON/RESUME | 3 & 4 | 2040-2260 |