Bleeding Hydraulic Control Unit
WARNING:
Ensure manual or pressure bleeding procedure is performed before bleeding Hydraulic Control Unit (HCU).
- Bleed base brake system using standard manual or pressure bleeding procedures. Refer to the appropriate MANUAL BLEEDING procedures or PRESSURE BLEEDING procedures. Connect DRB-II to Blue 6-pin Chrysler Collision Detection (CCD) data link connector, located under lower dash panel, right of steering column. See Fig 1 .
- Using DRB-II, select TEVES ABS MENU. Select ADJUSTMENTS. Ensure parking brake is set. Select BLEED BRAKES. DRB-II will display following in sequence: BLEED BRAKES ACTUATING MOTOR PUMP, BLEED BRAKES ACTUATING ALL OUTLET VALVES & MOTOR PUMP, BLEED BRAKES ACTUATING MOTOR PUMP, and BLEED BRAKES COMPLETE. After BLEED BRAKES COMPLETE is displayed, disconnect DRB-II. Repeat standard bleeding procedure.