LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1991 >> LeBaron Base, 2D Convertible, 2.5 J, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Wheel Alignment Specifications & Procedures) >> Alignment Specifications

Alignment Specifications

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 1992 Plymouth Colt Vista, 1992 Plymouth Colt, 1992 Mitsubishi Precis, 1992 Mitsubishi Pickup, and 1992 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
ALIGNMENT SPECIFICATIONS (COLT, COLT 200, MIRAGE & SUMMIT)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -2/3 -1 1/8 To -1/8
Caster (1) 2 1/3 1 3/4 To 2 3/4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -3/4 To 3/4
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -3/8 To 3/8 (-5 To 5)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (DIAMANTE)

Application Preferred Range
Camber (1) 0 -1/2 To 1/2
Caster (1) 2 7/16 1 15/16 To 2 15/16
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -1/8 To 1/8
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -1/16 To 1/16 (-2 To 2)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (ECLIPSE)

Application Preferred Range
1.8L
Camber (1)
Front 1/4 -1/4 To 3/4
Rear -3/4 -1 1/4 To -1/4
Caster (1) 2 5/16 1 13/16 To 2 13/16
Toe-In (1) 0 -1/4 To 1/4
Toe-In (2) 0 (0) -1/8 To 1/8 (-3 To 3)
2.0L
2WD
Camber (1)
Front 1/16 -7/16 To 9/16
Rear -3/4 -1 1/4 To -1/4
Caster (1) 2 3/8 1 7/8 To 2 7/8
Toe-In (1) 0 -1/4 To 1/4
Toe-In (2) 0 (0) -1/8 To 1/8 (-3 To 3)
AWD
Camber (1)
Front 3/16 -5/16 To 11/16
Rear -1 1/2 -1 To -2
Caster (1) 2 1/4 1 3/4 To 2 3/4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/4 0 To 1/2
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/8 (3) 0 To 1/4 (0 To 6)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (COLT VISTA, EXPO, SUMMIT WAGON)

Application Preferred Range
2WD
Camber (1)
Front 1/3 -1/8 To 7/8
Rear -1/2 -1 To 0
Caster (1) 2 1/8 1 5/8 To 2 5/8
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/8 0 To 1/4
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/16 (2) 0 To 1/8 (0 To 3)
AWD
Camber (1)
Front 2/3 1/8 To 1 1/8
Rear -1/2 -1 To 0
Caster (1) 2 1 1/2 To 2 1/2
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/8 0 To 1/4
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/16 (2) 0 To 1/8 (0 To 3)
Toe-Out On Turns (1)
Inner 34 1/2 To 38 1/2 N/A
Outer 30 1/2 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (GALANT)

Application Preferred Range
2WD
Camber (1)
Front 3/8 -1/8 To 7/8
Rear -3/4 -1 1/4 To -1/4
Caster (1) 2 1 1/2 To 2 1/2
Toe-In (1) 0 -1/4 To 1/4
Toe-In (2) 0 (0) -1/8 To 1/8 (-3 To 3)
AWD
Camber (1)
Front 1/2 0 To 1
Rear -1 -1 1/2 To -1/2
Caster (1) 1 1/2 1 To 2
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 1/4 0 To 1/2
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 1/8 (3) 0 To 1/4 (0 To 6)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (MONTERO)

Application Preferred Range
Camber (Front) (1) 5/8 1/8 To 1 1/8
Caster (1) 3 2 To 4
Toe-In (Front) (1) 1/4 0 To 1/2
Toe-In (Front) (2) 1/8 (3) 0 To 1/4 (0-6)
Toe-Out On Turns (1)
Inner 21 9/16 N/A
Outer 20 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (PICKUP & RAM-50)

Application Preferred Range
2WD
Camber (Front) (1) 2/3 1/8 To 1 1/8
Caster (1) 2 1/2 1 1/2 To 3 1/2
Toe-In (Front) (1) 3/8 1/4 To 1/2
Toe-In (Front) (2) 3/16 (5) 1/8 To 1/4 (3-6)
4WD
Camber (Front) (1) 1 1/2 To 1 1/2
Caster (1) 2 1 To 3
Toe-In (Front) (1) 3/8 1/4 To 1/2
Toe-In (Front) (2) 3/16 (5) 1/8 To 1/4 (3-6)
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (PRECIS)

Application Preferred Range
Camber (1)
Front 0 -1/2 To 1/2
Rear -11/16 -1 To -3/16
Caster (1)
With P/S 1 2/3 1 1/8 To 2 1/8
Without P/S 1 1/2 To 1 1/2
Toe-In (1)
Front 1/16 -1/8 To 1/4
Rear 0 N/A
Toe-In (2)
Front 1/32 (1) -1/16 To 1/8 (-2 To 3)
Rear 0 (0) N/A
Toe-Out On Turns (1)
Inner 35 7/8-38 5/8 N/A
Outer 31 1/2 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
ALIGNMENT SPECIFICATIONS (STEALTH & 3000GT)

Application Preferred Range
2WD
Camber (1) 0 -1/2 To 1/2
Caster (1) 3 1/2 3 To 4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -3/16 To 3/16
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-Out On Turns (1)
Inner 33 3/4 N/A
Outer 28 11/32 N/A
AWD
Camber (1)
Front 0 -1/2 To 1/2
Rear -1/8 -5/8 To 3/8
Caster (1) 3 1/2 3 To 4
Toe-In (1)
Front 0 -1/4 To 1/4
Rear 0 -3/16 To 3/16
Toe-In (2)
Front 0 (0) -1/8 To 1/8 (-3 To 3)
Rear 0 (0) -3/32 To 3/32 (-2 To 2)
Toe-Out On Turns (1)
Inner 33 3/4 N/A
Outer 28 11/32 N/A
(1) Measurement in degrees.
(2) Measurement in inches (mm).
scientia non olet · About LEMON Manuals