Low Speed Operation Check

On all models except Precis, disconnect wiring connector from wiper motor. Connect battery voltage to wiper motor connector and ensure wiper motor operates. Check low speed operation by connecting battery positive voltage to one connector terminal and battery negative voltage to another connector terminal. See LOW SPEED OPERATION CHECK TERMINAL NUMBERS for terminal numbers and model application. See Fig 1 .

LOW SPEED OPERATION CHECK TERMINAL NUMBERS

Model	Voltage (-) Terminal No.	Voltage (+) Terminal No.
Colt	1	3
Colt Vista	1	4
Conquest	1	4
Raider	3	1
Ram-50	1	3

Fig 1: Front Wiper Motor Terminal Number Location

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

On Precis models, the wiper/washer switch must be checked for continuity between the following terminals:
- With switch in "OFF" position, continuity must be present between "LO" and "P".
- With switch in "INT" position, continuity must be present between "LO", "P", "INT" and "Ew".
- With switch in "LO" position, continuity must be present between "LO" and "Ew."
- With switch in "HI" position, continuity must be present between "HI" and "Ew".
- With switch in "WASHER" position, continuity must be present between "Ew" and "W".