LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1987 >> Conquest 2.6 H, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Testing >> Wiper Relay >> Continuity Check

Continuity Check

  1. On all models equipped with a wiper relay except Conquest remove the relay from the wiper motor bracket. Ensure continuity is present between terminals No. 2-5. See Fig 1 .
    Fig 1: Wiper Relay Terminal Number Location
    G68208Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. On Conquest models, ensure continuity is present between terminals No. 2-5 and 1-3 when no voltage is applied to relay. Apply positive battery voltage to relay terminal No. 2 and negative voltage to relay terminal No. 5. Continuity should be present between terminals No. 3-6.
scientia non olet · About LEMON Manuals