LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1985 >> Laser Base, Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Low-Reverse Band (Rear)

Low-Reverse Band (Rear)

NOTE: Low-Reverse band adjusting screw is located on rear servo lever. Transmission oil pan must be removed to provide access to band adjusting screw. See Fig 1.
Fig 1: Low-Reverse Band Adjustment (Rear) Screw Location
G35234Courtesy of CHRYSLER LLC
  1. Drain transmission and remove oil pan. Loosen band adjusting screw lock nut about 5 turns. Ensure adjusting screw turns freely in case. In rear wheel drive models, tighten adjusting screw to 72 INCH lbs. (8 N.m). On front wheel drive models, tighten adjusting screw to 41 INCH lbs. (4.6 N.m).
  2. On all models, back off adjusting screw specified number of turns given in LOW-REVERSE BAND ADJUSTMENT . Hold in this position and tighten lock nut. Install oil pan and fill transmission with fluid.
    LOW-REVERSE BAND ADJUSTMENT

    Application Back Off Screw
    A-904-LA 4 Turns
    A-413 & A-470 3 1/2 Turns
scientia non olet · About LEMON Manuals