LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1985 >> Laser Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering General Servicing >> Lubrication >> Refilling & Bleeding System >> All Models

All Models

  1. Fill pump reservoir to proper level. Start engine and run momentarily. Stop engine and recheck fluid level. Add fluid (if necessary). Repeat procedure until fluid level remains constant after running engine.
  2. Raise and support vehicle so front wheels are off ground. Start engine. Turn steering wheel from side to side several times (without hitting stops). DO NOT  hold wheel in full left or right position. Fluid level should remain above pump inlet in reservoir.
  3. Fluid with air in it will have a light Tan or Red appearance. All air in fluid must be eliminated before normal steering action can be obtained.
  4. Return wheels to center position and operate engine for 2-3 minutes. Road test vehicle and recheck fluid level. Level must be at "HOT" mark on dipstick.
scientia non olet · About LEMON Manuals