Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Converter-to-Drive Plate Bolt | 55 (75) | |
| Differential Bearing Retainer-to-Case Bolt | 21 (28) | |
| Drive Plate-to-Crankshaft Bolt | 70 (95) | |
| Extension Housing-to-Case Bolt | 21 (28) | |
| Front Mount-to-Engine Bolt | 21 (28) | |
| Governor Counterweight Screw | 21 (28) | |
| Kickdown (Front) Band Adjusting Screw Lock Nut | 35 (47) | |
| Neutral Safety Switch | 25 (34) | |
| Oil Pump-to-Case Bolts | 23 (31) | |
| Output Shaft Gear Nut | 200 (271) | |
| Reaction Shaft Bolt | 21 (28) | |
| Ring Gear-to-Carrier Bolt | 70 (95) | |
| Side Mount-to-Engine Bolt | 40 (54) | |
| Starter-to-Bellhousing Bolt | 40 (54) | |
| Transaxle-to-Engine Bolt | 70 (95) | |
| Transfer Shaft Gear Nut | 200 (271) | |
| Valve Body Sprag Retainer-to-Case Bolt | 21 (28) | |
| INCH Lbs. (N.m) | ||
| Bellhousing Cover Bolts | 105 (12) | |
| Differential Cover-to-Case Bolt | 165 (19) | |
| Governor-to-Support Bolt | 60 (7) | |
| Oil Pan-to-Case Bolt | 165 (19) | |
| Rear Cover-to-Case Bolt | 165 (19) | |
| Reverse Band Shaft Plug | 60 (70 | |
| Speedometer Pinion Retaining Bolt | 60 (7) | |
| Valve Body | ||
| Attaching Bolts | 40 (5) | |
| Oil Filter Screws | 40 (5) | |
| Transfer Plate Screws | 40 (5) | |
| Transfer Plate-to-Case Bolt | 105 (12) | |