Flex Regulator & Motor: Removal
- Raise or lower window to proper access hole position. Remove screw attaching flex rack to drive arm. Remove regulator attaching rivets by knocking out rivet center mandrel and drilling rivet with 1/4" drill bit.
- Maneuver motor end of the flex drive regulator outside the large inside panel access hole. Rotate the regulator out of the door.
- If the window motor cannot be actuated and is stuck outside of access hole position, remove regulator attaching rivets as described above.
- Manually lift the window upward with the unriveted flex drive electric regulator still attached until the screw can be removed. If more access is required, remove 2 screws holding "T" track to the motor gearbox.