LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 1983 >> E Class 2.2 C >> Repair and Diagnosis >> Engine Performance >> System >> Electronic Fuel Control System >> Duty Cycle Solenoid R & I >> Removal

Duty Cycle Solenoid R & I: Removal

  1. Remove 2 duty cycle solenoid retaining screws and gently lift solenoid from air horn. Remove anti-rattle spring, 2 retaining screws and idle solenoid from carburetor.
  2. Remove 2 wide-open throttle cut-out switch mounting screws (if equipped). Mark location for proper assembly. Remove harness mounting screws and open retaining clip. Remove wires from connector and thread through clip.
scientia non olet · About LEMON Manuals