Locked Resistance Test
Mount starter in test bench. Follow test equipment manufacturers instructions. With battery voltage adjusted to 4 volts, amperage draw should be as shown in specifications.
STARTER SPECIFICATIONS
| Application | Amps. | |
|---|---|---|
| Cranking Amperage Test | ||
| Model No. 4111855 (1.5 HP) | 165-180 | |
| Model No. 4111860 (1.8 HP) | 180-200 | |
| Solenoid Amperage Test (6 volts @ 77°F) | ||
| Pull-In Circuit | 13-15 | |
| Hold-In Circuit | 8-9 | |
| No Load Amperage Test | ||
| Model No. 4111855 (3700 RPM minimum) | 90 | |
| Model No. 4111860 (5700 RPM minimum) | 90 | |
| Lock Resistance Amperage Test | 475-550 | |