Circuit/System Verification
NOTE:
The condition may be intermittent and require driving the vehicle, then reviewing the snapshot to verify resistance parameters do not drop out or spike. Refer to Testing for Intermittent Conditions and Poor Connections
- Refer to SIR Service Precautions .
- Ignition/Vehicle ON.
- Verify the scan tool Driver Seat Belt Sensor Signal status parameter changes between Fastened and Unfastened when the seat belt is buckled and unbuckled.
- If the parameter does not change
Refer to Circuit/System Testing
- Go to next step: If the parameter changes
- If the parameter does not change
- All OK.