Circuit/System Verification
DTC B1D3E 49
- Vehicle in Service Mode.
- Verify DTC B1D3E 49 is not set.
- If any of the DTCs are set
Replace the appropriate B342 UHF Low Energy Remote Control Access Sensor Transceiver.
- Go to next step: If none of the DTCs are set
- If any of the DTCs are set
- All OK
DTC B1D3E 00
- Vehicle in Service Mode.
- Verify DTC B1D3E 00 is not set.
- If any of the DTCs are set
- Program the K183 UHF Short Range Low Energy Remote Control Access Transceiver.
- Verify the DTC does not set.
- If the DTC sets, replace the appropriate B342 UHF Low Energy Remote Control Access Sensor Transceiver.
- Go to next step: If the DTC does not set
- All OK.
- Go to next step: If none of the DTCs are set
- All OK