Conditions for Setting the DTC

DTC 3000 00 

The control module detects an internal supply voltage error.

DTC 3000 41 

The control module detects a memory checksum failure.

DTC 3000 42 

The control module detects a general memory read/write failure.

DTC 3000 49 

The control module detects an internal hardware failure.

DTC 3000 4B 

The control module detects an internal temperature above the calibrated threshold.

DTC 3000 54 

The control module has not been programmed with the correct calibration file.

DTC 3000 56 

The control module detects that alignment is outside the calibrated range.

DTC 3000 57 

The control module has detected a mismatch between software/calibration and hardware.

DTC 3000 78 

The control module has failed to complete the alignment procedure or detects incorrectly adjusted or aligned component.

DTC 3000 97 

The control module detects a blockage of the sensor.