Removal Procedure
- Remove the spare tire and wheel assembly.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Remove the hose clamp (2) from the automatic level control air compressor inlet tube (1). Hose Clamp Replacement Guidelines - Spring Type
- Automatic Level Control Air Compressor Inlet Tube (1) - Remove
Remove the 2 automatic level control air compressor inlet tube retainers (1).
Automatic Level Control Air Compressor Tube Clip (2) - Remove
- Remove the automatic level control air compressor inlet tube (1) from the body grommet.
Automatic Level Control Air Compressor Inlet Tube (1) - Remove
NOTE:
Service mode will be automatically enabled when the ride height sensors detect the vehicle has been lifted off the ground. Service mode will automatically be disabled when the vehicle reaches 16 km/h (10 MPH).