Circuit/System Verification
NOTE:
If Battery replacement is performed under Warranty a Warranty Code from the EL-50313 Midtronics GR8 or EL-52800 Exteq DCBS Battery Tester/Charger is required.
- Verify the condition of the 12 V battery. Refer to: Battery Inspection/Test , and Battery Charging
- If a condition is present
Replace or repair as necessary
- Go to next step: If NO condition is present
- If a condition is present
- Verify the vehicle State of Charge is above 30%
- If the vehicle State of Charge is below 30%
Plug-in/charge vehicle to at least 30%
- Go to next step: If the vehicle State of Charge is at or above 30%
- If the vehicle State of Charge is below 30%
- A fault is not currently present, and may be an intermittent condition.