Removal Procedure
WARNING: This page is about a different car, the 2024 Chevrolet Silverado EV. However, it is still accessible from the selected car via links, so may be relevant.
Using a plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover insert (1) to release from the mount bracket cover.
- Separate the windshield multifunction sensor mount bracket cover insert (1) from the windshield multifunction sensor mount bracket cover.
Using a suitable plastic trim tool, carefully pry downward on the windshield multifunction sensor mount bracket cover (1) to release it from the windshield and remove.
Disconnect the electrical connector.
- Release the retaining tab (1).
- Slide the front view camera (2) upward to release.
Front View Camera (1) - Remove
NOTE:
Observe the mounting and location of the front view camera to ensure proper reinstallation.