Removal Procedure
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9)
Retaining Tab (2) - Disengage [2x]
- Front Compartment Fuse Block Cover (1) - Remove
Engine Coolant Air Bleed Hose (2) @ Engine Control Module Bracket - Reposition
Charge Air Cooler Outlet Air Tube Fastener (1) - Remove
- Retainer Spring (2) - Release
- Charge Air Cooler Outlet Air Tube (3) @ Throttle Body Assembly - Reposition
Disconnect the electrical connector.
- Throttle Body Bolt (1) - Remove [4x]
- Throttle Body (2) - Remove
- Remove and DISCARD the throttle body gasket.