LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2025 >> Equinox EV LT, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Electronic Transmission Range Select >> Repair Instructions >> Gear Shift Control Module Replacement >> Removal Procedure

Removal Procedure

  1. Extend the steering column to its furthest point to allow the instrument panel steering column upper trim cover to clear the instrument panel.
  2. GM6372087Courtesy of GENERAL MOTORS COMPANY

    Using a flat-bladed plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column lower trim cover and reposition.

  3. GM6372088Courtesy of GENERAL MOTORS COMPANY

    Turn the steering wheel approximately 90 degrees to the left of the centered position.

  4. Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
  5. GM6372089Courtesy of GENERAL MOTORS COMPANY

    Turn the steering wheel approximately 90 degrees to the right of the centered position.

  6. Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
  7. GM6372090Courtesy of GENERAL MOTORS COMPANY

    Return the steering wheel to the centered position.

  8. Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
  9. GM6372091Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connectors and release the wiring harness retainers as necessary.

  10. Instrument Panel Steering Column Lower Trim Cover (1) - Remove
  11. GM6300861Courtesy of GENERAL MOTORS COMPANY

    Electrical Connector (1) - Disconnect

  12. GM6300862Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Electronic Control Bolt (1) - Remove [2x]

  13. Gear Shift Control Module (2) - Remove
scientia non olet · About LEMON Manuals