Removal Procedure

Extend the steering column to its furthest point to allow the instrument panel steering column upper trim cover to clear the instrument panel.
Courtesy of GENERAL MOTORS COMPANY

Using a small plastic trim tool, separate the instrument panel steering column upper trim cover (1) from the instrument panel steering column lower trim cover.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Disconnect the electrical connector. (1)
Courtesy of GENERAL MOTORS COMPANY

Turn the steering wheel approximately 90 degrees to the left of the centered position.
Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Turn the steering wheel approximately 90 degrees to the right of the centered position.
Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Turn the steering wheel to the centered position.
Instrument Panel Steering Column Lower Trim Cover Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Instrument Panel Steering Column Lower Trim Cover (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Disconnect the electrical connector. (3)
Automatic Transmission Electronic Control Bolt (1) - Remove [2x]
Gear Shift Control Module (2) - Remove