Special Tools
- J-24402 - A Glass Sealant Remover
- Use a urethane adhesive systems which meet GM Specification GMW 3041.
Equivalent regional tools: Special Tools
J - 39822 Wiper Arm Puller
Refer to SIR Warning .
While operating, electrical control modules can produce heat and become hotter than their surroundings. To prevent burns allow sufficient time for the module to cool before removal.
If the windshield needs to be replaced and the vehicle is equipped with a front camera sensor for the Driver Assistance Systems, a GM replacement windshield is recommended. The replacement windshield must be installed according to GM specifications for proper alignment. If it is not, these systems may not work properly, they may display messages, or they may not work at all. If a windshield Is improperly installed, this could result in improper operation of the Forward Facing Camera system which could result in personal injury.
If broken glass falls into the defroster outlets, it can be blown into the passenger compartment and cause personal injury.
When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.
If a vehicle is equipped with a head curtain inflator module ensure that the inflator module and tether are undamaged. If tether or curtain airbag are damaged in any way, they must be replaced.
Use care when working around the head curtain inflator module. Sharp tools may puncture the curtain airbag. If the head curtain inflator module is damaged in any way, it must be replaced.